 |
|
 |
CDI Pre-Set
torque wrenches are designed for use on production lines and other
applications where a specific torque is required for repetitive
operations. The design, fabrication and materials used have been
developed in coordination with major manufacturers in actual production
use.
|
 |
 |
|
Part Number
|
Torque
Range
English |
Torque
Range
Newton
Meter |
Shank
Size
|
A
in. [mm] |
B
in. [mm] |
C
in. [mm] |
D
in. [mm] |
Wt.
Lbs. [Kg]
|
5T-I |
10 - 50 in.lb. |
1.1 - 5.6 Nm |
J |
6.5 (165) |
0.63 (16) |
0.61 (16) |
1 (25) |
0.35 (.13) |
10T-I |
50 - 250 in.lb. |
5.6 - 28 Nm |
J |
10 (254) |
0.63 (16) |
0.61 (16) |
1 (25) |
0.55 (.21) |
10ST-I |
60 - 300 in. lb, |
6.8 - 34 Nm |
J |
6.2 (158) |
0.68 (17) |
0.86 (22) |
1.4 (36) |
0.75 (.28) |
50T-I |
15 - 75 ft.lb. |
20 - 102 Nm |
J |
11 (279) |
0.68 (17) |
0.86 (22) |
1.4 (36) |
1.4 (.52) |
100T-I |
30 - 150 ft.lb. |
41 - 203 Nm |
Y |
19.5 (495) |
0.94 (24) |
0.86 (22) |
1.4 (36) |
2.3 (.86) |
200T-I |
40 - 200 ft.lb. |
54 - 271 Nm |
Y |
23.5 (597) |
0.94 (24) |
0.86 (22) |
1.4 (36) |
2.6 (.97) |
300T-I |
60 - 300 ft.lb. |
81 - 406 Nm |
X |
27.7 (704) |
1.12 (28) |
1 (25) |
1.4 (36) |
3.9 (1.45) |
600T-I* |
120 - 600 ft.lb. |
162 - 814 Nm |
Z |
55 (1397) |
1.5 (38) |
1.25 (32) |
1.25 (32) |
10.45 (3.9) |
* NOTE: No grip supplied ** NOTE: "X" and "Z" shank ends available on special order only. Contact CDI Sales Department.
Hex key size for adjusting torque (not included):
Hex Key: Fits:
3/32" 5T-I
1/8" 10T-I, 50T-I, 100T-I, 200T-I, 300T-I
3/16" 600T-I
Accuracy: This style of wrench meets or exceeds ASME B107.14M - 1994, ± 3% in direction of calibration.
|
|
 |